一、產品簡介 Introduction
產品名稱：磷酸鐵鋰專用添加劑 Name: Lithium Iron Phosphate Specifical Additives
產品型號：ADD-M Product: ADD-M
選用電導率高的材料以及天然優質石墨，經特殊工藝處理成納米級的超細粒子，均勻分散于水介質中成為乳液。
Nano ultrafine particles are obtained by selecting high conductivity materials and natural graphite as the raw materials through a specific treatment procedure and further dispersed in an aqueous medium to form an emulsion.
二、技術指標 Technical Index
三、產品用途 Product Usage
作為專用添加劑添加到制備磷酸鐵鋰正極材料前驅體中。建議的使用量為1.0-3.0%。
As specifical additive added to the anode material precursor of lithium iron phosphate. Recommended usage is 1.0-3.0 %.
四、產品特點 Product Features
1、超微離子，形成導電網絡，可顯著提高材料的電子導電性和鋰離子的躍遷速度，改善電池的低溫、倍率性能以及循環壽命。
Ultrafine partparticles are easily form conductive network, which can significantly enhance the electronic conductivity of materials and the transition rate of lithium ion and further improve low temperature, rate capability performance and cycle life of batteries.
2、石墨粒子顆粒流動性好，易于分散，涂布中表現優異的加工性能，也能顯著提高極片的壓實密度，有效增加了電池的能量密度。
Graphite particles have good mobility and dispersion, which not only leads to excellent processing performance in coating performance, but also can significantly improve the packing density of the pole pieces and effectively increase the energy density of batteries.
3、較好的粒度分布，使得導電性能優異，可減少其它導電物質的使用，增加活性物質的用量，有效提高了正極材料的克容量，還能顯著降低電池內阻，提高活性物質利用率。
Optimum particle size distribution can reduce the use of other conductive materials, increase the amount of the active material, effectively improve the gram capacity of the anode material, further reduce the battery internal resistance and enhance the utilization of the active material.
4、穩定的乳液分散效果，避免干粉微粒的團聚現象，使得材料使用中能保持很好的一致性和電池性能的穩定性。
Stable emulsion dispersion can avoid dry particulate agglomeration and make battery to maintain good consistency and stability.
五、注意事項 Cautions
運 輸：適用于各種運輸途徑，防日曬雨淋，運輸途中，包裝袋上方防止重壓。
Transport: Suitable for all kinds of transportation, far away from sunshine and rain, and avoid high pressure above package in transit.
規 格： 25Kg/桶
Specifications：25 kg/barrel
存 儲：環境溫度-5至35℃，相對濕度不大于75%的潔凈、干燥室內，不能暴露于腐蝕性氣體中，即 開即用，避免開封吸潮。
Storage: Stored in clean and dry places where environment temperature is between -5℃ and 35℃ and relative moisture is no more than 75%. Avoid exposure to corrosive gas and absorption of moisture out-of-the-box.
保質期：產品保質期12個月。
Warranty: 12 months.